Porsche Camber Kits

97-04 Porsche Boxster 986 Front and Rear Upper Strut Mounts

Set of 2
Starting at $549.00
By Evolution Motorsports
Our billet aluminum camber plates/strut mounts are a direct replacement for the original rubber mounted units. The OEM units flex and move during cornering which causes spongy handling characteristics. Our precession engineered mounts will add more precise handling while allowing 10mm more negative ...


98-05 Porsche 996 EVO Billet Camber Plates / Strut Mounts

Set of 2
Starting at $550.00
By Evolution Motorsports
Our billet aluminum camber plates/strut mounts are a direct replacement for the original rubber mounted units. The OEM units flex and move during cornering which causes spongy handling characteristics. Our precession engineered mounts will add more precise handling while allowing 10mm more negative ...


Porsche 911/ Boxster/ Cayman RSS Locking Plate Kit for RSS Adjustable Rear Toe Steer Kit

Set of 2
$90.00
By RSS
Part # 333
The RSS Tarmac Series Adjustable Rear Toe Steer Kit is designed for Porsche models that have been lowered. This kit will help minimize the suspension geometry change in the REAR of the vehicle. Allows for toe adjustment at the toe steer arm giving the ability to make adjustments ...


Porsche 911/Boxster/Cayman RSS Adjustable Front Toe/Bump Steer Kit

Kit
$485.00
By RSS
Part # 370
The RSS Adjustable Front Toe/Bump Steer Kit is designed for Porsche models that have been loweredThis kit will help minimize the suspension geometry change in the front of the vehicleAllows for bump steer adjustmentComes with high misalignment rod endImproves handling and feedbackAVAILABLE FOR ALL P ...


Porsche 964/993 Adjustable Camber Plates

Pair
$499.00
By Ground Control
Features include more camber adjustment than stock, caster adjustment, and use of aircraft-grade bearings. Every component is anodized or plated, including fasteners. Adds extra travel to avoid excessive bottoming out, this is a very well engineered product. Camber and caster are adjustable separate ...


Porsche 986/987 Tarett Engineering GT3 Lower Control Arm Shims

Each
Starting at $10.00
By Tarett Engineering
For adjusting camber & lower control arm length.  10mm provides about 1 degree of additional negative camber. Now available and reasonably priced in the following sizes: 1mm 2mm 4mm 6mm 8mm 10mm 16mm Note: Shims are sold individually, but usually used in pairs. If you ...


Porsche 986/987/996/997 Adjustable Front Upper Camber Plates

Pair
$499.00
By Ground Control
Part # CCP997
PLEASE SPECIFY WHEN ORDERING: Your brand of shocks (stock, bilstein, koni, ect...) and spring diameter (stock, 60mm 2.5'')   These plates fit the 986 & 987 Boxster and Cayman as well as all models of the 996 and 997 Carrera including C2, C2S, C4, C4S, Turbo, GT2, GT3, GT3 RS. Features inc ...


Porsche 991/981 Tarett Engineering Front GT3 Control Arm Kit (for models with Litronics)

Each
Starting at $980.00
By Tarett Engineering
This conversion kit contains everything need to convert your front or rear suspension to the two piece 996 GT3 lower control arm design. By adding shims between the inner and outer control arm, you can adjust camber far beyond the capability of the stock suspension, for improved tire contact and be ...


Porsche 993/964 Adjustable Camber Plate Set - Front

Kit
Starting at $499.00
By Rennline
Under extreme conditions, such as road racing and Autocross, negative camber is required to keep as much of the tire’s contact patch on the road as possible. Stock suspension mounts will not allow you to achieve the necessary amount of negative camber required for this type of performance driving. R ...


Porsche 996 C2/997 C2/Boxster/Cayman Sealed Front Camber Plates - Set

Set of 2
$475.00
By Rennline
Part # S21
Under extreme conditions, such as road racing and autocross, negative camber is required to keep as much of the tire’s contact patch on the road as possible. Stock suspension mounts will not allow you to achieve the necessary amount of negative camber required for this type of performance driving. R ...


Porsche 996/997 Rear Upper Adjustable Camber Control Arm

Each
$195.00
By Rennline
Part # S71.50
If you’re serious about how your 993, 996, 997, Cayman, or Boxster handles, you should upgrade the rear suspension with adjustable control arm links. There are two major drawbacks to the factory links: 1) You can’t lower your car and maintain proper suspension geometry. The factory links create too ...


Porsche 996/997 RSS Adjustable Rear Link Kit (Dogbones)

Kit
$775.00
By RSS
Part # 307
996 & 997 ADJUSTABLE REAR LINK KIT (DOGBONES)Set of 4The RSS Adjustable Rear Link Kit is the proper way to correct the rear suspension geometry of lowered 996 and 997 models when necessary. Greatly improves handling and feedback by removing rubber bushing deflection. Lowered vehicles with stock ...


Porsche 996/997/986/987 Tarett Engineering GT3 Control Arm Kit

Each
Starting at $835.00
By Tarett Engineering
This conversion kit contains everything need to convert your front or rear suspension to the two piece 996 GT3 lower control arm design. By adding shims between the inner and outer control arm, you can adjust camber far beyond the capability of the stock suspension, for improved tire contact and be ...


Porsche 996/997/986/987/981/991 Tarett Engineering Front Tie Rod w/Bump Steer

Each
$212.50
By Tarett Engineering
Part # 996TRDWBMP
This competition tie rod is the ultimate design for your 996/997/986/987/981 or 991.  In addition to additional toe adjustment, it will also allow you to correct bump steer.   A precision Teflon lined spherical rod end is used for smooth operation and long life.    ...


Porsche 996/997/987/993 Tarett Engineering Locking Plate Kit For Adjustable Toe Link

Kit
$95.00
By Tarett Engineering
Part # LKPLT01
This bolt on kit will help put an end to continuously needing to realign your 996/997, 987 or 993 rear suspension.   The factory adjustment cams slip under heavy loading, resulting in alignment changes.  These locking plates replace the problematic cam adjusters, and will preci ...


Porsche 997 GMG Racing RSR Style Adjustable Thrust Arm

Kit
$895.00
By GMG Racing
GMG’s Motorsport adjustable thrust arms are made CNC machined of aerospace grade aluminum and are hard anodized for corrosion resistance from the elements during track use. The Motorsport adjustable thrust arms also feature anti dive and anti squat geometry to help keep the roll center of the ...


Porsche 997 GMG Racing WC Bumpsteer/Toesteer Front Kit

Kit
$545.00
By GMG Racing
Bumpsteer kit  Complete kit avaialble. Half kit is used on the front of the vehicle and replaces the tie rod end to correct bump. Requires NO modification to chassis, direct bolt on replacement part.  Can be used on daily driven street cars, links do not transmit road harshness into ...


Porsche 997 GMG Racing WC Bumpsteer/Toesteer Rear Kit

Kit
$795.00
By GMG Racing
Bumpsteer kit  Complete and half kit available. Half kit is used on the front of the vehicle and replaces the tie rod end to correct bump. Requires NO modification to chassis, direct bolt on replacement part.  Can be used on daily driven street cars, links do not transmit road harshn ...


Porsche 997/987 Tarett Engineering Front GT3 Control Arm Kit

Each
Starting at $890.00
By Tarett Engineering
This conversion kit contains everything need to convert your front or rear suspension to the two piece 996 GT3 lower control arm design. By adding shims between the inner and outer control arm, you can adjust camber far beyond the capability of the stock suspension, for improved tire contact and be ...


Porsche 997/987 Tarett Engineering Front GT3 Control Arm Kit (for models with Litronics)

Each
Starting at $955.00
By Tarett Engineering
This conversion kit contains everything need to convert your front or rear suspension to the two piece 996 GT3 lower control arm design. By adding shims between the inner and outer control arm, you can adjust camber far beyond the capability of the stock suspension, for improved tire contact and be ...


Porsche 997TT/GT2/GT3/GT3 RS/C2 /C4S GMG Racing Dogbone Kit

Kit
$1,050.00
By GMG Racing
Developed and tested over thousands of miles of racing and street driving. Our fully adjustable rear dog bones are the highest quality links on the market period,made of machined aluminum billet rod (6061) hard anodized and include Indy car rod ends. This is a great way to improve the handling and f ...


Porsche Adjustable Rear Toe Steer Kit

Set of 2
$515.00
By RSS
Part # 312
The RSS Tarmac Series Adjustable Toe Steer Kit is designed for Porsche models that have been lowered. This kit will help minimize the suspension geometry change and allow toe adjustment at the toe steer arm giving the ability to make adjustments independent of the factory eccentric bolts which may n ...


Porsche Lower Control Arm with Adjustable Camber

Set of 2
$1,100.00
By RSS
Part # 356
RSS High Performance Tarmac Series Suspension Components are designed, engineered and manufactured on location here in the USA. RSS Tarmac Series Control Arms are manufactured from 6061 aerospace grade billet aluminum. This allows for a more uniform molecular structure at every point of the arm over ...


Porsche Rear Toe Control Arm W/Bump Steer Kit and Eccentric Locks

Each
$250.00
By Rennline
Part # S70.50.41
If you’re serious about how your 993, 996, 997, Cayman, or Boxster handles, you should upgrade the rear suspension with adjustable control arm links. There are two major drawbacks to the factory links: 1) You can’t lower your car and maintain proper suspension geometry. The factory links ...


RSS Tarmac Series Service Kit

Kit
$50.00
By RSS
Part # 380
Automotive motorsport components are subjected to extreme stress and highly variable conditions that are often unpredictable. Factors such as driver technique, vehicle setup, track conditions, surface roughness and environmental contamination combine to provide a harsh operating environment for safe ...




GMP 710 Pressley Road Charlotte, NC 28217 Phone: 888.488.2028 Fax 704.523.4910