Audi S3 2.0T FSI Stage III Turbocharger System by APR
Building upon over a decade’s worth of experience with turbocharged Audi and VW engines, including over half a decade with direct injected engines, APR’s Engineers have taken the Golf R and S3 to ground breaking levels of performance without compromise.
APR is pleased to introduce the Golf R and S3 Stage III Turbocharger System. Producing over 460 horsepower in racing configurations with nearly no increase in turbocharger lag over the vehicle’s factory setup, Stage III places the Golf R's and S3’s accelerative performance in the same league as that of large V8 supercharged muscle cars and sub $400,000 exotic sports cars. Thanks to the Golf R's and S3’s all-wheel drive system, power delivery is unlike anything previously experienced in standard form. As you hear a new exotic growl from your exhaust system, expect exhilarating g-force levels sure to put a huge grin on your face!
At the heart of Stage III is a GTX2867R turbocharger, consisting of the latest technologies from Le Mans’ winning turbo manufacturer, Garrett Honeywell. The internally gated unit features a fully-machined, ten-blade billet compressor wheel and a dual ball bearing oil and water-cooled CHRA. APR’s Engineers spent countless hours testing turbine inlet and A/R sizes in order to decrease turbocharger lag without negatively impacting peak power. The newly developed compressor housing utilizes anti-surge porting, which greatly complements the lightning fast spool characteristics of this unit and grants APR’s Engineers the ability to deliver massive levels of torque inducing boost pressure, even in the lower RPM range.
Each turbocharger unit is assembled and clocked in house at APR with the necessary brackets to ensure proper wastegate fitment and orientation. Each wastegate is then calibrated for precise operation and control to ensure seamless integration with the expertly recalibrated OEM engine management system.
APR Stage III Software
The factory Bosch MED 9 engine management system is responsible for proper operation of the engine in all conditions. With built in compensational data for environmental variables and varying load conditions, the factory ECU is far more complex and intelligent than units found in other vehicle makes and marks.
With the significant amount of changes included in the APR Stage III Turbocharger System, APR’s Engineers spent months recalibrating the engine management system to operate smoothly as if intended by the OEM. Thanks to APR’s incredible proprietary calibration suite, data logging software and full access to the coding structure of the ECU, appropriate and intelligent changes are made to ensure flawless drivability and excellent performance without compromise.
APR’s EMCS program switching technology puts control of the ECU in your finger tips allowing you to access modes for standard pump fuel, high output race fuel and even reduced output valet modes to protect your vehicle against improper use by other individuals. This technology is patented by APR and is found nowhere else in the world. It’s Performance Without Compromise only APR can deliver!
Attached to the turbocharger is APR’s investment-cast, super alloy, nickel-chromium-based Inconel 625 Manifold featuring APR’s Sequential Exhaust Pulse runner lengths. Unlike hand welded tubular manifolds, Inconel is a very high temperature resistant material designed to withstand extreme exhaust gas temperature changes without expanding, contracting, melting or cracking under stress. This material is typically found only at the highest levels of professional motorsport racing where reliability is essential to success.
Investment-cast Inconel features heat retention characteristics which aid in turbo response by keeping exhaust velocity high. Ensuring each exhaust pulse arrives at the collection point without collision is critical to producing lightning fast response and immediate torque delivery. Using 3D modeling and computational fluid dynamics software, APR’s Engineers designed varying short runner lengths calibrated to deliver sequential exhaust pulses without collision. A reduction in backpressure from the high flow design directly enhances power delivery.
Each manifold is investment-cast in the United States of America and machined in house on APR’s CNC machines to ensure high casting tolerances, repeatable results and strict quality control. The thick casting material reduces unwanted exhaust noise leaving behind a powerful and exotic growl.
All of these characteristics result in a manifold designed without compromise backed by a confidence inspiring lifetime warranty
Induction and Charge Piping
Wire reinforced, multi-ply silicone hoses provide an unrestricted path for airflow to enter and exit the turbocharger at over 1,000 kilograms per hour. The ultra rigid design ensures boost and vacuum piping will not swell or collapse causing leaks and restrictions in the induction and charge piping system supporting boost response and turbo recovery. Each hose is engineered to fit properly into the Golf R and S3 engine bay with all necessary emissions and reference ports securely affixed.
APR’s Easy-Flow Silicone Hose design features stepped mounting surfaces for smooth transitions from one pipe to another. Traditional designs simply sit on top of each other, often resulting in a disruptive airflow path. By using the stepped design, hoses fit properly without airflow restrictions, resulting in the most ideal path for moving air through the turbocharger and into the engine.
Turbo Outlet Pipe
To provide unrestricted and smooth airflow from the turbocharger to the intercooler, the APR Stage III Turbocharger System includes a cast enlarged turbo outlet pipe to properly deliver the additional airflow from the larger turbocharger.Mass Airflow Housing
The Golf R and S3’s engine management relies on load calculations to accurately control the engine. Calculations are made by measuring airflow across the Mass Airflow Sensor and this is a critical component of the APR Stage III Turbocharger System.
The small and restrictive factory unit is removed and replaced with the much larger housing. To ensure accuracy, APR’s MAF housing is cast in the United States of America and CNC machined in house at APR to ensure repeatable results. The long, precision-machined housing features a honeycomb airflow straightener to further aid in accurately reading airflow levels. Simply enlarging the MAF housing is not permissible without accurate adjustments to the factory engine management system, which is included with APR Stage III Turbocharger System.
Oil and Coolant Lines
APR’s oil and coolant lines are specific to the Golf R and S3 Stage III System and provide years of leak free operation. The oil lines feature flexible braided stainless steel with CNC mandrel bent hard-lines for specific and clean hose routing as if intended by the OEM.Low Pressure Fuel Pump
The APR Low Pressure Fuel Pump is a complete, OEM style, PWM controlled drop in fuel pump solution designed to fit cleanly in the OEM location. The upgraded pump provides adequate low-pressure fuel to the APR High Pressure Fuel Pump to support the power levels produced by the APR Stage III Turbocharger System.
High Pressure Fuel Rail Valve
The factory Golf R and S3 gasoline direct injection injectors require higher than factory fuel rail pressure to achieve targeted air fuel ratios under high load, wide open throttle operation. APR’s Low Pressure Fuel Pump delivers the desired volume of fuel to the APR High Pressure Fuel Pump, which provides increased fueling headroom over the factory unit. However, the factory High Pressure Fuel Rail Valve limits maximum rail pressure below the desired level. The included APR High Pressure Fuel Rail Valve is calibrated to increase the maximum rail pressure to levels necessary for proper operation.
In doing so, APR’s able to support far higher horsepower levels than achievable on the existing APR Stage III Turbocharger Systems without the need to alter the OEM correct-spray-pattern injectors. This results in smoother part throttle operation, factory-like cold starts and fewer unburned hydrocarbons emitted from the tailpipe under all conditions compared to other fueling options.
The GTX2867R internally gated turbocharger unit features a Garrett five-bolt flange, which differs from the OEM turbocharger flange. To support this design, the APR Stage III Turbocharger System includes a hydroformed 3” stainless steel exhaust downturn, which mates directly to an APR Midpipe, Downpipe or Turboback Exhaust System.
Nuts, Bolts, Gaskets, Washers, Clamps, Fittings, etc
Every APR Stage III Turbocharger System includes all necessary components for a complete install.
No matter how small the part, each piece of the APR Stage III Turbocharger System oozes with quality evident in pieces like the Stage III's laser cut ancillary brackets and carriers.
Proper temperature range spark plugs are included with each APR Stage III Turbocharger System.
(VW and Audi's Ratings)
256 - 270 HP
243 - 258 FT-LBS of Torque
(APR's Rating on 93)
265 FT-LBS of Torque
91 (R+M)/2 or 95 RON
381 FT-LBS of Torque
+120 HP Gain over Stock at 6650 RPM
+122 FT-LBS Torque Gain over Stock at 3650 RPM
93 (R+M)/2 or 98 RON
410 FT-LBS of Torque
+139 HP Gain over Stock at 6550 RPM
+151 FT-LBS Torque Gain over Stock at 3750 RPM
93 (R+M)/2 or 98 RON with APR Runner Flap Delete
410 FT-LBS of Torque
+148 HP Gain over Stock at 6550 RPM
+151 FT-LBS Torque Gain over Stock at 3700 RPRM
100 (R+M)/2 or 104 RON
428 FT-LBS of Torque
+195 HP Gain over Stock at 6850 RPM
+168 FT-LBS Torque Gain over STock at 3900 RPM
Stage III Required Components (Sold Separately)
APR High Pressure Fuel Pump
APR Carbonio Intake
APR Intercooler System
APR Midpipe (If you currently own an APR AWD Downpipe or APR RSC Turboback Exhaust, this item is not necessary. For best results, APR recommends including the APR RSC Catback Exhaust System..)
Motul Oil, Coolant and Oil Filter Now Included
Part of the APR Turbocharger System install process requires removal of the OEM Turbocharger. During this process, oil and coolant must be drained and should be replaced to offer superior performance and protection. The APR Turbocharger Systems are now complete turn key solutions, including everything you need down to the oil, coolant and oil filter. During checkout you'll be given the option between Motul Specific 502.00, 505.00 & 505.01 5W40 or Motul Power 300V engine oil as well as Motul Inugel Optimal Ultra Coolant and an OEM oil filter. The Premium Motul lubricant package is included at a much lower than retail price point.
Attention International Buyers! We cannot ship APR products internationally. We are authorized to ship products within the United States Only.
APR LLC is an automotive engineering firm operating a 36,000 sq. ft. performance campus in Opelika, AL. APR was founded in 1997 with a corporate philosophy of Integrity, Excellence and Innovation. APR's Sole Mission is to provide the highest quality and most highly engineered aftermarket performance products available for Porsche, Audi and Volkswagen vehicles.
APR, Enhancing the Driving Experience with No Compromise.
|Wheels And Tires||+Service & Maintenance||Items for Suspension Upgrades||Items for Drivetrain Upgrades||Items for Brake Upgrades||Items for Interior Upgrades|
|Items for Exhaust Upgrades||Items for Engine Upgrades||Items for Exterior Upgrades||Items for Electronic Upgrades||Lifestyle||Installations Overview|