Mercedes GLC / GLE / GLS SUV and Coupe RENNtech Hand-Held Suspension Module

Part # 32.222.6001
Price: $1,495.00 Each

The RENNtech Hand-Held Suspension Module (HSM) is designed to work with the GLC, GLE and GLS - SUV and Coupe, equipped with the Mercedes Airmatic and Magic Body Control Suspensions.The unit allows the user to have full control over all four corners of the vehicle’s suspension and adjust in 1mm increments.

The HSM comes pre-loaded with a RENNtech lowering setting. User can load their custom setting onto the HSM to set the vehicle to their preffered ride height.

The desired lowering setting will be loaded onto the vehicle via the ODB2 port in the footwell of the car. After plugging the HSM into the ODB2 port, the user can toggle a switch to load the factory or the adjusted ride height. After a few seconds, the new setting is uploaded and the car will adjust to the new height.

The factory setting will always be stored on the HSM and the user can set the vehicle back to the factory setting.

Once the settings are loaded, simply unplug and store for future use.

All RENNtech HSMs are adjustable via USB using either Windows or Android OS.The software allows the user to adjust the ride-height at each corner in 1mm increments independently. The software also has three locations where the user can store pre-configured suspension setups for quick changes.



  • C253 - GLC43 AMG Coupe
  • C253 - GLC63 AMG Coupe
  • W253 - GLC43 AMG SUV
  • W253 - GLC63 AMG SUV
  • C292 - GLE43 AMG Coupe
  • C292 - GLE63 AMG Coupe
  • W166 - GLE43 AMG SUV
  • W166 - GLE63 AMG SUV
  • X166 - GLS63 AMG SUV
  • Also including: All GLC, GLE and GLS Models equipped with the optional Adaptive Air Suspension/Air Body Control



Please note:

  • Available for the GLC, GLE and GLS, SUV and Coupe equipped with the Mercedes Airmatic Suspension
  • Lower or Raise your car to your prefered ride height.
  • Adjusted setting loaded onto car via ODB2 port
  • Installation in less than 10 seconds
  • With the first use, the DLM will be 'married' to the vehicle and can only used with this vehicle


RENNtech HSM | Hand-Held Suspension Module Specifications:

  • Adjustment increments: 1mm

  • Maximum Lowering: Limited only by vehicle

  • Adjustment Methods: PC or Android (Tablet)

  • Size: 73mm x 44mm x 24mm 

Images are provided by the manufacturer/supplier and may be a generic photo for representation purposes, and not of the actual product. Pricing also subject to change without notice.

GMP 710 Pressley Road Charlotte, NC 28217 Phone: 888.488.2028 Fax 704.523.4910